Showing posts with label Buildings. Show all posts
Showing posts with label Buildings. Show all posts
Thursday, 1 August 2019
3D Printed: Stone Buildings
I finally got the Ulvheim stone buildings cleaned up and ready for painting. I have printed second storeys and roofs for both the 100% building and the 110% building, and I also printed trapdoors and ladders. This version is the 100% building.
Here you see the ruined second storey. I really like how it is designed so that the stairs still leads to the remains of the upper level.
This is the 110% version.
And here it is with another ruined upper level. The stairs still work!
I expect Ulolkish to take them home with him tomorrow and then soonish give a shout whether he considers the 110% print fitting, or if I should print an even bigger version before going completely to town printing ruins.
Labels:
28mm,
3D,
3D Printing,
Buildings,
Fantasy,
Models,
Multi-Purpose,
PLA,
Plastic,
Scenery,
Terrain4Print,
Thingiverse,
WIP
Monday, 27 May 2019
3D-Printed: Rohan Settlement WIP
| 120% |
But the printer has been busy, as I am experimenting with upscaling Terrain4Print's Small Fantasy Viking House.
As you may recall (otherwise you can check below), I did not find the inherent size of the model convincing for 28mm miniatures, as the doorway stands below the height of the shoulders of most minis.
Thus, I did a 120% upscaled version, which you can see to the left. It is better, but if that Royal Guard were to enter, he would still have to crouch quite a lot!
I would like the (most of) my buildings to actually look like something the minis could be living in, so I had to make another test. Luckily, my printer had nothing better to do this weekend, so as long as there was PLA on the spool, I could just knock myself out.
| The 100% Version |
| 130% |
I am also printing some palisades, and the platform above the gate is printing as I write this.
The palisades are modular, and the files include a pin for assembling the pieces, but I had to scale it up to 105% to get a snug fit, so you may want to print a test or two if you start printing the palisades.
I am waiting for my filament pusher to get a re-stock (should happen next week), as I am running out of some of the filaments I am using (I prefer the light grey PLA for gaming models, as the details pop better than with other colours), but I shall be printing some more palisade pieces (including some 90 degree corners), until I run out of brown and grey stuff - then I shall allow myself to let the printer be employed for non-gaming purposes for a while.
Labels:
28mm,
3D,
3D Printing,
Buildings,
Fantasy,
Humans,
LotR,
Models,
PLA,
Plastic,
Rohan,
Scenery,
Terrain4Print,
Thingiverse,
WIP
Thursday, 23 May 2019
3D Printed: Stone Townhouse
My first print of the intact version (with remixed upper storey and roof by Talismancer ) was at 100%, but I think it is a tiny bit too small for 'heroic' 28mm minis.
Thus, I am now printing another one at 110%, and you can see the first result at the bottom of this post (I am almost out of that Slate Grey PLA, and it is out of stock at my filament pusher's webstore, so I am taking a break from these buildings).
As can be seen below, both storeys have a nice level of interior details, and I plan to print some furniture to add to the gaming experience of having this kind of housing populating a town/city table.
Ulolkish and I have agreed to do 3D printed city/town/ruins scenery as a joint project; I print and clean up the pieces, and he paints at least half of them, and we can then have a large set of the stuff to use between us (we live only 11 kilometers apart, so it is a matter of less than ½ hour to fetch a big box by car).
I recently had some trouble with my CR10S, and as a consequence I have been printing with a bit too little retaction, causing some stringing. While this can be easily removed, I am going to play around with the settings to see if I can avoid it completely - like I am now again returning to use a skirt for bed adhesion instead of a brim, as the latter means more cleaning up to do before the pieces can be painted.
I have not yet printed the trap door for the roof, but I guess I may be doing that later today in some dark brown filament I have running on the printer at the moment.
Here are all the pieces of the first building.
To the right and below you can see the ground floor printed at 110%.
I think it fits the GW Skelly better, as it looks like he could actually pass under the door arch without banging his skull against it.
I shall, of course, still use the first one, but I am certain that I shall print further buildings at the slightly larger size!
Over the next couple of days, I am going to print a larger version of the 'Fantasy Viking' Rohan house, and also some palisades for protecting those Rohan settlements from Wild Men and Uruk-Hai raiders! And, of course, as mentined, a roof trapdoor for the Ulvheim building.
Labels:
28mm,
3D,
3D Printing,
Buildings,
Fantasy,
Models,
Multi-Purpose,
PLA,
Plastic,
Scenery,
Terrain4Print,
Thingiverse,
WIP
Friday, 17 May 2019
Preparing Some Ruins
I have managed to get two ('two' seems to be the theme of this post) gaming appointments for after the weekend (Monday GoB. 40 points, at 10 a.m. with Ulolkish, possibly followed by a quick tussle using the above and additional buildings, and Tuesday GoB, 36 points, at 6:30 p.m. with Kevin, where I shall try using my Army of Darkness just a tiny bit more effectively that the last time, and possibly also introduce him to AoF), so earlier today I was rummaging around in the garage attic to alter the table for GoB, and set up a secondary table for Age of Fantasy, as we are to be away most of both Saturday and Sunday for two seperate confirmation celebrations.
I have had these two two-part Ziterdes ruins (Emperor's Palace and Administratum Wangun) in my possession for quite a few years, but in preparing a 4x4 table for One Page Rules Age of Fantasy Skirmish, I found that it was about time I got the upper floors secured with some strong glue.
Labels:
28mm,
Buildings,
Completed,
Dark Future,
Fantasy,
Foam,
Modern,
Multi-Purpose,
Near Future,
Ruins,
Scenery,
Sci-Fi,
Techno-Fantasy,
Terrain,
Ziterdes
Monday, 13 May 2019
3D-Printed: Edoras House WIP
As part of my cross-games Rohan project, I thought it was time to get some Rohan themed building into the mix.
This building is Terrain4Prints's Smaller Fantasy Viking House from Thingiverse. I think it is a tad on the small side for 28mm minis, so the next one I shall print at 120%, and see if that fits my taste better.
I shall, of course, still paint and use this, as variation is the salt of the earth, anyway.
Labels:
28mm,
3D,
3D Printing,
Buildings,
Fantasy,
Humans,
LotR,
Models,
PLA,
Plastic,
Rohan,
Scenery,
Terrain4Print,
Thingiverse,
WIP
Thursday, 22 November 2018
Barbarian Huts WIP - Take 3
This is how far I got today - I do not know if I shall have more time for painting before Saturday afternoon, as I also have to write the scenario up.
I did not manage to get started on the furs, they might be my first priority if I find time for sitting down at the pain(t) station Thursday or Friday (I just started my five-nights working week so I shall have to sleep most of the days.
What ever happens, the huts will be used in the state they have reached, as the rescue scenario requires some structures to search for prisoners!
Labels:
28mm,
Andrea Sfiligoi,
Barbarians,
Buildings,
Co-operative Gaming,
Fantasy,
Ganesha Games,
Generic,
Models,
Multi-Purpose,
Objectives,
Orcs,
Resin,
Scenery,
Scotia Grendel,
Sellswords and Spellslingers,
Skirmish,
WIP
Tuesday, 20 November 2018
Some Progress on the 'Orc Village' - WIP
Tomorrow I shall start on some of the details, such as the entrances, and the skulls and furs adorning the huts.
Labels:
28mm,
Andrea Sfiligoi,
Barbarians,
Buildings,
Co-operative Gaming,
Fantasy,
Ganesha Games,
Generic,
Models,
Multi-Purpose,
Objectives,
Orcs,
Resin,
Scenery,
Scotia Grendel,
Sellswords and Spellslingers,
Skirmish,
WIP
Monday, 19 November 2018
Barbarian Huts (and a Tent) WIP
As I need some structures for the lost adventurers to be held captive in, I am busy preparing some of my old Scotia Grendel Barbarian stuff for the table.
There's NO way I am going to get them fully completed for Saturday, when I hope to get a game arranged. but they will have to do in their various states of readiness.
The two last pics are how far I got today - tomorrow will see more detail work, mainly on the stone huts, and I shall paint the tusks. Wednesday is probably the last day this week that I can find time for painting, so I hope to reach an acceptable level then (and if not, it is just how it is).
| The light is doing some weird shit to the black primer |
| Some minor damage to the left roof, and some missing rope. I may get back to it, some day, but probably not if I know myself right |
Labels:
28mm,
Andrea Sfiligoi,
Barbarians,
Buildings,
Co-operative Gaming,
Fantasy,
Ganesha Games,
Generic,
Models,
Multi-Purpose,
Objectives,
Orcs,
Resin,
Scenery,
Scotia Grendel,
Sellswords and Spellslingers,
Skirmish,
WIP
Friday, 16 November 2018
Sellswords & Spellslingers: Preparing for a Rescue Scenario
I have had these Scotia Grendel 'Barbarian' buildings for quite a while - and with Finghal being held prisoner by the vile Orcs of the Badlands, it is now time to get two or three of these prepped and painted as quickly as possible.
I expect to don my dust mask tomorrow afternoon and get at least two of the smaller huts cleaned up and rinsed (time will tell if I shall need to break out the greenstuff), and then, hopefully, I shall be able to prime them before we go to Sønderjylland Sunday. I would like to have them painted up for next weekend, as I hope to be able to get a gaming appointment with Ulolkish, and I would be surprised if he will not be interested in joining me on an expedition deep into enemy territory in search for two lost adventurers...
I expect to don my dust mask tomorrow afternoon and get at least two of the smaller huts cleaned up and rinsed (time will tell if I shall need to break out the greenstuff), and then, hopefully, I shall be able to prime them before we go to Sønderjylland Sunday. I would like to have them painted up for next weekend, as I hope to be able to get a gaming appointment with Ulolkish, and I would be surprised if he will not be interested in joining me on an expedition deep into enemy territory in search for two lost adventurers...
Labels:
28mm,
Andrea Sfiligoi,
Barbarians,
Buildings,
Co-operative Gaming,
Fantasy,
Ganesha Games,
Generic,
Models,
Multi-Purpose,
Objectives,
Orcs,
Resin,
Scenery,
Scotia Grendel,
Sellswords and Spellslingers,
Skirmish
Monday, 1 October 2018
3D Printed Wizard's Tower
The blog has been rather quiet for a while for two reasons:
Well, I have printed a lot, and painted a couple of minis, since my last update, and I am going to post a lot of it over the next couple of weeks, so stay tuned!
The next print was the flat version of a level with a single door, as I want to use it as a hut for the healer in a Sellswords & Spellslingers scenario.
I am pretty pleased with the outcome of this - and happy with my choice of colours, as I think the finished model will be passable for the table without being painted right away!
Below is the 'complete' hut, fresh from the printer (tower section completed this morning):
- I have been busy painting for the Old School Fantasy Painting Party o'er at the LAF, and
- I wanted September to generate a more modest amount of hits, because one of the joys of blogging for me is the process of surpassing the results of previous months - and with a gap of about 10K hits between the all-time 3rd and 4th best months, it was a bit tedious as soon as a month reached 3rd rank.
Today's post is about my latest print - of my first purchased bundle of STLs ever, namely some pieces for a Wizard's Tower by Devious Games, run by 'beefcake' as he is known on the LAF.
I started a couple of days ago by printing the roof in Fiberlogy Easy PLA Burgundy. It was printed at 0.1 resolution due to the sloping surfaces.
All the sections for the Wizard's Tower come in two variations; one with integrated tabs on the underside for securing a good grip between levels, and one with flat buttom for printing without supports. The set also provides a separate ring with tabs to attach to the flat versions, to the same end as the integrated tabs.
I printed the version with integrated tabs, as I prefer to avoid glueing pieces together where possible.
This was printed in Fiberlogy Easy PLA Graphite at 0.2 resolution (saving a lot of time).
| Inside details |
Below is the 'complete' hut, fresh from the printer (tower section completed this morning):
Thursday, 23 August 2018
Legion Terain: A Small Cluster
A 'family photo' of the recently printed terrain pieces.
The printer has been busy doing dungeon tiles the last couple of days, and a Baby Groot pencil holder today, and I have not had time to clean up the extra five Rhydonium cannisters, yet, because I have been working on my jungle terrain, but expect more home-made plastic stuff, soonish...
The girls and I are going to Horsens European Medieval Festival this coming weekend, so there will be no games to report this week, but as soon as I have cleared the jungle bases away, I shall get back to painting Lea's party for Sellswwords & Spellslingers, and hopefully get a game in with her soon!
Labels:
30mm,
3D,
3D Printing,
Buildings,
Completed,
DIY,
Fantasy Flight Games,
FFG,
Industrial,
PLA,
Plastic,
Scatter Terrain,
Sci-Fi,
Space Opera,
Star Wars,
Star Wars Legion,
Terrain,
Thingiverse
Sunday, 19 August 2018
Star Wars Legion: Rhydonium Cannister
Photo's a bit unfocused, but I think you'll get the picture 😜 Very dangerous stuff to use as cover, but never the less going to be used as scatter terrain!
Printed at 30mm/sec, 200 Centigrades, 0.1 resolution. Currently printing another five of those.
Printed at 30mm/sec, 200 Centigrades, 0.1 resolution. Currently printing another five of those.
Star Wars Legion: Vaporator
In use all over the galaxy, wherever clean surface water is hard to come by, and frequently seen on arid planets like Tatooine.
I printed this at 200 Centigrades, 0.1 resolution, 40mm/sec, 10% triangular infill; slow prints at low temperatures definitely seem the way to go!
Model is from Thingiverse, and the mini is just for scale purposes.
Saturday, 18 August 2018
Star Wars Legion: Power Station
Another print of a Thingiverse file - perfect for breaking up LOS. I am very pleased with the way this printed - nice finish for 0.2 mm layer height/resolution, and I think I shall have to try printing it in 0.1, too, to compare the results. I am currently printing a moisture vaporator at slower print speed, lower temperature, and 0.1 mm resolution, and I am excited to see the finished piece later this evening!
Miniature for scale only.
Miniature for scale only.
Sunday, 12 August 2018
Star Wars Legion: Bunker Finally Complete!
I printed both the closed, and open doors set today. As you can see in the first picture, 'Ironing' does not seem such a good idea - although some of the door surface is smoother, it is also as if the nozzle has pushed material towards the middle of the triangular areas, something I shall have to mend with my Dremel and some sandpaper.
The open doors were printed without Ironing, and they have the characteristic top layer muster that I cannot seem to get rid off. Well, at least it keeps the door surfaces in the right shapes...
The open doors can slide to the sides (and actually close, so I do not really need the closed door print), which meas, I have to do some interior features - but that is only fair for a game this scale!
The open doors were printed without Ironing, and they have the characteristic top layer muster that I cannot seem to get rid off. Well, at least it keeps the door surfaces in the right shapes...
The open doors can slide to the sides (and actually close, so I do not really need the closed door print), which meas, I have to do some interior features - but that is only fair for a game this scale!
Star Wars Legion: Bunker Walls Finished
Right now, the closed doors are printing, and this time I am trying out the 'Iron' setting, which should result in a much smoother surface.
It would seem that I have the infamous 'z wobble' problem, as the 'waves' on the vertical surfaces have not disappeared completely after changing the Infill Pattern, and I shall have to address that before printing decorative stuff that is not meant to be painted, but for terrain stuff - especially objects with 'natural' surfaces - it is not a big issue.
Subscribe to:
Posts (Atom)