Showing posts with label Pike & Shot and Zombies. Show all posts
Showing posts with label Pike & Shot and Zombies. Show all posts

Tuesday, 21 October 2014

2014-08-24 Pike & Shot and Zombies Test Game

The table layout
Somehow I completely forgot to post this - perhaps because I was busy preparing for Attic Attack II...

Duregar and I played our first game of  Pike & Shot and Zombies; Duregar controlled the survivors, and I took control of the shamblers.

We didn't roll up the survivors equipment, just went with approximately what the minis were carrying.

We used a stripped down events cards deck.

I used a home-made movement template for randomized zombie movement instead of the ingerent rule of moving the zombies according to where the movement-die lands. No dice rolled across my tables, please!

The scenario was as follows:

A sage once living in a village is rumoured to have gathered information on the undead - it is said that he wrote down this forbidden knowledge in a gigantic tome that was placed in his tomb with him after his demise.

The elders of the town presently harbouring the adventurers are very keen to get hold of the 'Book of the Dead', as they think it holds the key to ward off the threat of the walkers for good.

The party advanced across the bridge into 'biter-country',
following a path leading towards the ruined  village.
Some of the shamblers moved about in an erratic fashion,
and our heroes thought themselves safe for now.
The walking dead did notseem to have any clue

Suddenly, a surge of undead appeared from a small wood.
The elf opened up with a deafening salvo from
some piece of hand artillery he had brought to the party...



...and suddenly the area was crawling with shamblers.

The dwarf addressed the new situation in a rather agressively fashion

Which heralded general havoc.

One of the survivors decided to wander off
to shut down a spawning point with some undead still around...

...which was, so to speak, a bad idea
At this point we decided to call it a day.
This game suffered from only one player controlling the survivors. It would surely be more fun to have several players conrolling one survivor - or small group of survivors - each, and giving each player his own agenda/objectives to pursue.

PSZ has a lot of RPG-ish features, and when exploited to full extent, I think it will make an excellent beer-and-pretzel game that a group can enjoy for an infinite amount of time, given the right Game Master/Umpire to keep things moving and offer interesting scenarios.

Competitive play? No thanks, but benevolent mockery among players who know each other well should make for some interesting and fun sessions.

I think the zombies can be controlled by the 'AI', if you set up some conditions for the way you move them. Then 2 players may be enough for a spunky game, but I would prefer 3+ survivor players.

Thursday, 11 September 2014

A Ghoul , Just in Time for Attic Attack.

A bit late, I know - but here are some pics of a Ghoul I readied for Attic Attack II:

I am very pleased with the way he turned out. There may be a small painting error or two, but all-in-all I think he looks very... nice?

I had to finish him so I could use him as the leader of one of my ghoul (Mantic zombies) units - but he should also see action in PSZ, Strange Aeons/VuK, and probably Gothic Horror settings, too!

It's a very old Citadel sculpt, and with this one I have now finished painting the contents of thjat blister (took me just about 20 years).

I have another blister of those guys, and I hope to paint them a bit faster ;o)


 Below, you'll find a couple of additional shots.





Tuesday, 19 August 2014

Mayhem and Destruction!

I just killed an old square slotta with my Dremel. It felt good!


I am re-basing a horde of oldhammer plastic skeletons for God of Battles. They'll also do service as 'zombies with sticks' for PSZ, animated skeletons for Gothic Horror, and probably a lot of other things, but for now, they are destined to become part of Argonor's Army of Undeath. Behold and despair!

Monday, 18 August 2014

Pike & Shot AND Zombies Boards - Getting There!

I am almost done preparing the boards for my first game of PSZ.

I basecoated the boards over the weekend, and as my eldest daughter has come down with a flu, I had to stay home from work today to look after her, and thus I could sneak out to the garage attic and drybrush the boards.

I have hit a bit hard with the brush here and there, and I'll mend that during the week, getting the table ready for a test run of the rules Saturday or Sunday (I may be going on a sailing trip with an old classmate one of the days, so I don't know, yet).

I'm looking forward to finally trying out this game that I've had in my possession for several years - will be interesting to see, if 30 zeds are enough for 2-3 survivors, or if I need to get some more done.

Only thing I need to do, now, is to make a Random Movement Template for the zombies, as I don't want to roll a dice across my game boards to determine direction, but I can mock one up with a ruler, and laminate it, for this first installment.
I'll be using some of the Event Cards (those I have the proper minis for), so I have to print, laminate, at cut out a set of those, too, but that's a question of dedicating 10 minutes or so...






Thursday, 17 July 2014

Almost Z for PSZ...

Another batch (the last for now) of 10 Mantic shamblers for various purposes. Among other things, I'll use them for Ghouls (4 units) in my Lords of Undeath GoB28 army, as soon as I have painted my fourth long OOP, rare, etc., etc., Citadel Ghoul to use as the leader of the fourth unit.

The blood is much better on these than on the previous batch, I think. This time, TCR was layered over Vallejo Black Red + Black highlighted with Scab Red.


And a family photo:


I now just have to finish my boards (need paint), break out my old Mordheim cardboard buildings, and flesh out a couple of survivors, then we're Z to go!

Oh, and I need to make a template for randomized shambler movement, as I don't like the rule about moving in the direction the dice landed. No dice-rolling on my carefully textured and painted gaming boards - no, thank you, Sir!

Saturday, 5 July 2014

A New Table - For PSZ!

I have begun making the table I'm going to use for my PSZ: Warhammer Apocalyse Z project:


I'm going to make 3 2'x4' (60cm x 240cm) for a total of a 4'x6' (240cm x 360cm)'standard' sized table, but I think I'm going to make several add-ons of various sizes and shapes to allow for all kinds of scenarios.

And the boards will be used for multiple other purposes, too, of course ;o) Funnily enough, it's the first time I do boards of this size, having focussed on smaller tables for skirmish gaming the last 10 years or so.

I expect to be ready for the first game just after the summer holidays!

Wednesday, 2 July 2014

More Zombies.

Finished this second batch today. Bases are awful - the highlighting colour is too thinned down to use for a proper drybrush, so I may apply a Devlan Mud wash to get some definition back into the texture.


The blood looks a bit too much like wet red paint in this picture - not quite so much IRL.

The shamblers will - like everything else I do these days - serve multiple purposes; Pike & Shot AND Zombies. Dead walk Again, Ghouls for GoB28, zombies/ghouls/cannibals for WWWII, CROM!, Pulp Alley, Strange Aeons, and Von Unaussprechlichen Kulten, etc.

Saturday, 7 June 2014

Zombies Galore!

Finished basing and 'splattering' these two, which were painted for me by @Duregar. As soon as I have quick-painted all 30 Mantic zeds I've assembled, It is time for a Dead walk Again game using both the modern and the fantasy shamblers.


I also finished these after some experimenting with the base colours. Note that the base are rather small for 28mm figs (18mm and 20mm steel washers), as it enables the zeds to come closer together for that 'horde' look.


They are the first batch finished for my Pike & Shot AND Zombies (PSZ) project, and as mentioned above, they'll also be used for Dead walk Again (DwA).

Testing Soil...

I am trying to figure out which colours to use on the bases of my PSZ zeds.

I am aiming for a 'dried soil' look, rather than the usual 'post-apocalytic Fallout desert' or 'post-apocalyptic tarmac and concrete rubble'. Think a desolated renaissance Europe!

Here are some tests - comments and suggestions are VERY welcome!


The differences are subtle, but they are there!

Friday, 9 May 2014

More LotR...

There was a sale on in my Friendly Almost Local Game Store (FALGS).


I recently saw some AotD painted as zombies,  rather than ghosts and I like that look (and the notion that they are corporeal instead of ethereal, and thus can be destroyed), and will include some in my PSZ project, that should enter the final phase kind of soonish (am almost done assembling 30 zeds).

Saturday, 26 April 2014

Short Shamblers.

I just received these in the mail today, courtesey of 'El Prez' on the LAF.

Supposedly undead dwarfs (and a very dead dog) and I think I'll need to sculpt some entrails on one of them...


They are headed for my PSZ: Warhammer Apocalypse Z - project, for which I'm almost done assembling the first 30 Mantic zombies.

Friday, 22 November 2013

The End is Coming!

Having painted 5 minis during the Medieval Painting Order challenge at the LAF that I can use as human survivors for my PSZ: Warhammer Apocalypse Z project, it is now time to turn my attention to the living dead (it IS a game about battling zombuies, after all).

So, here they are, my first assembled Mantic plastic shamblers:


I just started a week of vacation, so I expect to get a lot of these assembled, and also to get some of the long overdue AARs updated.

Thursday, 14 November 2013

Another Renaissance-ish Mini...

My 3rd Empire Spearman for PSZ:WAZ (and for the Medieval Painting Order at the LAF) has been finished today.

I have made some observations regarding painting these 'slashed' garments:

If I paint the main colours first. I rub off highlights from the dark (red in this example) colours, and get paint residue and other dirt(?) on the light (white parts) in the process of twisting and turning the mini to get all the details done, so:

Unless you use  some tool to hold the mini by the base while painting it, paint all the little detail first, then the darkest parts of the main areas, and finally the lightest parts of the main areas.

That way you handle the mini as little as possible after painting the slashed fabric, thus minimizing the risk of doing handling damage.

If you use a cork or clasp to hold the mini, don't bother

As you can see, this guy does not trust his companions, and has opted for a full cuirass instead of a mere breast plate solution. Only fitting for a survivor in a zombie game, I think... ;o)

With some dwarves and elves I already have used for Song of Blades and Heroes, I now have plenty of survivors for the first couple of games of PSZ, so I'll turn my attention to the zombies for a while (but also have to paint a few Pulp Figures).

I don't have many models sporting guns, but I don't think that PSZ is an obvious choice for hard-core wysiwyg-ing, as the survivor models are mainly there to represent the players, and I intend to (mainly) have each player play one survivor (experienced players may ptobably gain followers over time, but initially it will be one man, one character).

The 30-40 zombies will be given a very sloppy paintjob, probably in batches of 10:

- Black primer
- Army Painter Skeleton Bone or Necrotic Flesh sprayed from above
- A dark wash (probably Devlan Mud,while supplies last - then a substitute)
- Another light spray from above
- Details picked out
- Bases finished

When I have a neat horde, I'll decide whether to continue down the fast lane, or if I'll start painting some individually.

To supplement the zombies, I intend to rebase and 'touch up' some old Citadel plastic skellies - after all, it's a fantasy post-apoc setting, so the magic that animates the fresh corpses can also be responsible for this Dance Macabre.

If everything goes according to plan, I may be able to get a small game running during my Chrismas Vacation. But it never does. Besides that, winter is coming, making it difficult to spray minis, as I don't have a well ventilated, non-residential, heated room to do so. I do have an old, working, kitchen ventilator I intend to use for a 'spray box', and it may be about time that I get that project on tracks...

Worst case scenario, I should have enough undead for a game at the end of February, or so...

Sunday, 10 November 2013

PSZ: Another Survivor

I finished this Movember bugger yesterday:

Some might say that I should paint them more gritty, dirty, and bloodied, but I like to paint my minis neat.

That way I can also use them for other purposed than just zombie games.

This was my second red tryout. It consists of old GW Red Gore, GW Wasdakka Red, Wasdakka Red with some white, and Wasdakka Red with even more white.

It gives a slightly desaturated/bleached/worn look, which can be very useful. An even more bleached look can, of course, be obtained by starting with Wasdakka and adding further layers with more white mixed in.

I'lla paint another of these spearmen this coming week, trying yet another combo of reds; I'm trying to fin a method for a good, saturated red that does not go orangeish or pinkish, because i intend to paint up a Forgefather team for DredBall (somewhen... I have to assemble my guts for cleaning them up, first...), and I haven't quite struck home, yet.

Somehow, I had gotten his right side contaminated with a touch of Bestial Brown, and I had to redo some of the white this morning, but as it turned out even better than the first time around, it was really worth it. I almost wet-blended some of it, working with white and a very pale grey at the same time, mixing some of it on the mini.

Saturday, 9 November 2013

PSZ: Warhammer Apocalyse Z is cllosing in...

I visited my gaming pal Ulrik in Odense today to collect the goodies he has bought for my little PSZ project.

Yes, he actually got 60 Mantic zombies (at a discount from his FLGS) for me to use at no cost for me.

He also gave me two dripper bottles for water, so I don't have to run to and fro my painting sessions to thin pots of paint.

At the right, the shamblers are drying after a quick hot bath
with dish-washing soap.
Thankfully, they are made of normal plastic,
not the dreadful restic like the DreadBall minis.

Pike Shot and Zombies - correction

On page 7 of the PSZ rulebook says that:

"Initiative determines the number of actions the survivor can take each turn."

This shoud read:

"Initiative determines the number of actions the survivor can take each phase."

To attack an opponent, a survivor must alocate sufficient actions to do so. But when a survivor is attacked in an opponent's phase, he gets his full action allotment to use when fighting back.

This is not clearly stated anywhere in the rules. but I have the author's word for it; Stephen Danes run a Yahoo group for his Father Tilly rules, and I asked about how actions work in close combat, and this was his answer:
____________________________
Hi,

I'm happy to answer PSZ questions here -
The 'attacks'; attribute is the maximum number of attacks that the survivor can have each round of combat. Each weapon requires the player to spend a certain number of actions when delivering an attack - for example, one action to strike with an infantry sword, two actions when using a two-handed axe. This means that the survivor can only use their maximum number of attacks if enough actions are used to allow this to happen. A survivor that has a sword and can deliver four attacks per turn would have to allocate four actions that turn to get those attacks. If the survivor moves into contact range with a zombie and has no actions remaining, the survivor will not be able to use an attack that turn - but the zombie will! So its obviously a good idea to move into contact only when you have sufficient actions for combat. During the zombies phase, any survivors that are in contact with zombies will get all of their actions to use in close combat.
I hope this clears it up a bit. If you have any further questions - let me know.
____________________________

Wednesday, 6 November 2013

A Bretonnian Archer

Very old 3rd Ed. model that I finished couple of weeks ago, for my PSZ:Warhammer-Project (and for the Medieval Painting Order at the LAF):



I am still experimenting with my reds.

This shade is quite rich, and I think it consists of old GW Red Gore - new GW Evil Sunz Scarlet - old GW Blood Red - Foundry British Red Coat.

I have a pulp mini with the green flock just drying almost ready for taking a pic. I think it should be ready for presentation tomorrow.
 
 

Thursday, 17 October 2013

A Little Pulpishness...

Have been rummaging through my many boxes of minis this evening in search for The Crimson Scorpion and The Creeping Claw (Pulp Figures) to paint as characters for Pulp Alley and Starnge Aeons. I found them - AND the boy zombie from Zombiesmith that I thought I lost before moving to our house 3 years ago!

I'm just about finishing a Bretonnian archer for Pike & Shot AND Zombies (and the Medieval Painting Order at the LAF), and the next couple of weeks I shall be focusing on 1: A half-painted Evil Hooded Minion, 2: Short Round, 3: The Crimson Scorpion (to use as leader for my Evil Hooded Minions), and 4: The Crimson Claw (either a leader by himself, maybe even a Terror (super villain), or a sidekick for The Crimson Scorpion. On the side I have some more minis to re-base onto washers, so I'll be awfully busy.

When they are done, hopefully I have got the zombies for PSZ, and am about getting them ready for some primer.

Thursday, 10 October 2013

2013-10-10, Work in Progress

Well, as I stated elsewhere, I haven't been idle the last couple of weeks - I just haven't had time to update.

I had to fix this guy's base (he is a Superfig Brick, but I use him as a bad guy for pulp games) because the neodyne magnet under the base had come loose; I use super magnets under slottas to make them stick to the magnetic A4-sheets I put at the bottom of printer paper boxes for miniature storage. All minis with integral bases (and a lot of small terrain features) I now base on steel washers, so the magnetic sheet solution seems the most practical.

For the same reason, I just started rebasng these Pulp Figures brits (I used them to get started playing Pulp Alley) that were formerly - unnecessarily - based on slottas:



The captain's cane also needs repairing a bit, thus the matt black enamel on the tip.

When playing our first game of Pulp Alley, we realized that miscellaneous civillians are needed for the Plot Points, and I have decided, that every time we roll up a type of mini I don't already have painted, I'll rush such a figure to the front of  the painting queue.

This time, the figure in question was a 'Clever Child' - and what better way of solving this than painting up this Pulp Figure from the set 'Stalwart Companions' as Short Round from The Temple of Doom?

Shown here with cleaned mold lines, and based on a steel washer with some filler to smooth out the shape of the integral base.

Some (long) time ago, I got six OOP Dungers from Curtis at Ramshackle Games for free to give to my eldest daughter who wanted her own herd for Dunger Derby. I finally got my act together this week and got them cleaned a bit and glued to washers:

I have to rinse them in soap water before priming  for Anna to paint them herself. I shall try introducing her to the layering technique of progressively lighter shades.

Speaking of Dunger Derby, I think it may be about time we play it - I just dusted my desert board off for last sunday's game of Pulp Alley, so it's just a question of putting my painted Dungers and the varios markes on it.

For my Pike & Shot and Zombies: Warhammer Apocalypse Z project - AND for the 'Medieval Painting Order' at the Lead Adventur Forum, I painted these two:

A 3rd Ed. Warhammer Bretonnian archer, and a 6th Ed. plastic Empire sprearman.

I am stil re-learning my techniques  after a long hiatus, so I'm not completely satisfied with the results, but they'll have to do. Every mini takes me ages to paint, partly because I paint painstakingly slowly, partly because I rarely have more than ½ hr to sit down at get something done.


I'm also painting up another Archer, here shown as WIP.

I have 8 of these old Perry sculpts, and I intend to paint them (over time) as belonging to the same retinue, and then maybe get me a few more, or maybe get some 5th Ed. plastics to supplement them.

Finally, I have been rebasing these Copplestone sculpts (I'm not sure whether they are from Mark Copplestones own series, or from Grenadier/eM4) that I bought a couple of years ago. I simply painted and modelled the bases to fit with my other models:


 As you can see, I do try to get a few things done, and as I'm at home, today nursing my youngest daughter who's got a sore throat, I thought I could Work a bit on this, sorely neglected, blog.

I have started writing up the promesed X-Wing AAR, too, but it tales a while to do.

Stay tuned for a couple of additional posts later today!

Saturday, 20 July 2013

Pike & Shot and Zombies plus SuperSystem

It's still too darn hot to fiddle with small bits o'lead and plastic, but I have been digging out some of the rulesets I bought a couple of years ago - SuperSystem 3rd Ed. and - as the headline says - Pike & Shot and Zombies.

I am determined to get a game of SuperSystem organized, as I have already painted to factions of minis and generated their profiles (for 2nd Ed., so I have to work them over to check the points
values), and to get some Mantic Zeds for PSZ, which I intend to play as 'Warhammer Apocalypse Z' with the option of playing survivors of the various races from that setting (which should make it easier to recruit players).

I already have begun making racial adjustments to the survivor generation charts, and I now have to get me some Zeds... the upside is that it will at the same time put me back on tracks with the Dead Walk Again 'Zombiecalypse Now' project, as the Mantic shamblers are sufficiently generic for using in a modern setting, too.

My goal is to stage the first game before Oct. 1st, and maybe bring the game to Horisont in Esbjerg (if it occurs, and I don't have to work that weekend).

The painting method will be block out skin and shroud, wash with Devlan Mud or the likes, drybrush original colours, pick out visible intestines, eyes, teeth, nails/claws, and maybe add some blood splatter.

I hope to be able to finish 10 zombies in a single paint session this way, but I'm out of practise, so I'll just have to see about that. My gaming pal Ulrik has painting sessions at his appartment every other Saturday, and I may pack up the minis, brushes, and paints to go there a couple of times to get some Work done without the distractions of Family life. And maybe get some of the other guys there interested in a game or two....