Another Great Haul

I won a few minis in a second-hand auction, and they should come in handy later in my Warlords of the 41st Millennium project.

Of course, the flying thingamadoo needs a small repair, and the Assault Marines need to be assembled and painted, but apart from that, I'm pretty pleased with this batch.

The Orks can be used as is, and so can the Techmarine, the Servitors, and the Chaplain, while the hooded Marine is actually a Dark Angel (Cypher? I'll have to investigate further ... dispatch the Interrogator Chaplain!), and the Psyker is a Grey Knight. Both the latter need some colour changes.

The Bikers and the Land Speeder will have to get gradually repainted for my Ravenwing, and the Gun-toting mini-gunship-thingy. too.

Repairing a Rogue Trader Era Space Marine Scout

When I dug out the Dark Angels I painted for In the Emperor's Name some years ago, much to my chagrin I found that a sniper rifle barrel was broken.

I am going to attempt to superglue it in place, but if that fails, I shall have to drill a shallow hole for the barrel to sit in.

Again, my Citadel Assembly Handle is coming to my aid, and it is actually fast becoming one of my standard go-to solutions for any kind of fiddly repair job - a sound purchase, as it turns out.

You will notice that I have added a rubber band - it is because the springs, or whatever it pulling the vise/clamp together around the mini's base, are not quite tight enough for smaller bases, but the rubber band is an easy and cheap way to mend that.

3D Printed: Four Tyranid Capillaries

Finished the fourth one yesterday, and as I am now on a two-day print of a Tyranid Spyre/Chimney (or what ever it is called), I think it is time for cleaning some of them up for painting (I am going to print at least one more, so that I may have enough for the highest number of Objectives it is possible to roll up in Grimdark Future: Firefight).

3D-Printed: Tyranid Capillary #3

This piece is 11cm high, and the third one successfully printed.

I am printing another piece of the first one with slightly different settings, to see if I can get rid of the stringing, and when that is finished, it is time for cleaning up all four for priming.

I intend to ink-paint them over white primer, to keep the production time as low as possible, as I also want time for painting a couple of character minis for Age of Fantasy Skirmish and Sellswords & Spellslingers, respectively (not that they are not both going to be used in both games, eventually, but, ya'know...).

The rest og the day, my printer will be churning out 3-man Mortal Gods sabot bases for use in Age of Fantasy Skirmish, as our games has reached a size where moving entire units in one go is nice and saving time.

3D-Printed: Tyranid Capillary #2

I printed the second capillary - also found on Thingiverse - yesterday, and the third one (somewhat taller) should be ready later this morning.

I really like how these turn out, and I cannot wait to have enough to slap some paint on and get them ready for the table.

I cannot emphasize enough how much I enjoy being able to make low-cost themed terrain like this for my games, and I heartily recommend getting a printer for gaming and other hobby purposes!

3D-Printed: Tyranid Capillary

Printed this today, the file kan be found on Thingiverse.

Although not extremely apparent, I still have an issue with stringing (I have had that since I changed my settings to try avoiding the clogging problem I had for a while), I hope to get Cura dialed in again, soon.

I am printing some of these to use as Objective Markers in One Page Rules Grimdark Firefight, for when my Tyranids are on the table.

I have another one printing at the moment, and it should be done this evening, when I shall start a larger version to print over night.

As soon as I have four or five I shall prep and paint them, so that I can get them on the table.

One Page Rules: Grimdark Firefight Patrol WIP

Face the wrath of the Angels of Death, if you dare!

I have dug out and dusted off some RT01 plastic beakies (Corvus Armour) Space Marines for playing One Page Rules Grimdark Firefight.

I started painting, and based these, many years ago, but Warhammer 40.000 never really got to me as a game, although I have always loved the setting. Now, however, I think that I may actually get a few models finished (I also rebase them on washers instead of the slotta-plinths).

When looking at this picture, I realized that the Devastator Marine had slipped backwards on his base when I positioned him for the photo, so I just rectified that.

When these are ready (150 points) it is time for 200 points worth of Genestealers - I think I have also finally decided on a paint scheme for my 'stealers/Tyranids; the one I started using about 10 years ago never really grew on me, but now I have a fairly good idea about a quick-paint method that should both look good, and allow me to get some finished models on the table in a relatively short time.