3D Printed: Four Tyranid Capillaries

Finished the fourth one yesterday, and as I am now on a two-day print of a Tyranid Spyre/Chimney (or what ever it is called), I think it is time for cleaning some of them up for painting (I am going to print at least one more, so that I may have enough for the highest number of Objectives it is possible to roll up in Grimdark Future: Firefight).

3D-Printed: Tyranid Capillary #3

This piece is 11cm high, and the third one successfully printed.

I am printing another piece of the first one with slightly different settings, to see if I can get rid of the stringing, and when that is finished, it is time for cleaning up all four for priming.

I intend to ink-paint them over white primer, to keep the production time as low as possible, as I also want time for painting a couple of character minis for Age of Fantasy Skirmish and Sellswords & Spellslingers, respectively (not that they are not both going to be used in both games, eventually, but, ya'know...).

The rest og the day, my printer will be churning out 3-man Mortal Gods sabot bases for use in Age of Fantasy Skirmish, as our games has reached a size where moving entire units in one go is nice and saving time.

3D-Printed: Tyranid Capillary #2

I printed the second capillary - also found on Thingiverse - yesterday, and the third one (somewhat taller) should be ready later this morning.

I really like how these turn out, and I cannot wait to have enough to slap some paint on and get them ready for the table.

I cannot emphasize enough how much I enjoy being able to make low-cost themed terrain like this for my games, and I heartily recommend getting a printer for gaming and other hobby purposes!

3D-Printed: Tyranid Capillary

Printed this today, the file kan be found on Thingiverse.

Although not extremely apparent, I still have an issue with stringing (I have had that since I changed my settings to try avoiding the clogging problem I had for a while), I hope to get Cura dialed in again, soon.

I am printing some of these to use as Objective Markers in One Page Rules Grimdark Firefight, for when my Tyranids are on the table.

I have another one printing at the moment, and it should be done this evening, when I shall start a larger version to print over night.

As soon as I have four or five I shall prep and paint them, so that I can get them on the table.

3D-Printed: Camp & Baggage WIP

My CR10S S3 has been busy making some Camp & Baggage the last week.

The large Black Pavilion of course is the field habitation of my Necromancer,.
It can be found HERE

The Oseberg tents can be used for various purposes.

The file is to be had HERE

The first two printed have been sprayed with Army Painter Skeleton Bone and had the A-frames basecoated - I intend to do a little more work on them before each game they are to appear on the table.

The crates and the barrel are both from a Delving Decor Dwarven set - found on Thingiverse just like the tents.

I have not had time to sit down to clean up and assemble the Renedra Saxon tents - I shall reveal the reason in my next post.

3D Printed: A Bunch of Star Wars Containers

I have quite a collection of 'Medium Cargo Containers' by now - and I also printed some Kyber Crystal Containers, to have something to use as portable objectives.

When I leave work Monday morning, I have 1½ week off, until Wednesday night in week 43, so I expect to get my second batch of jungle bases moving and finished, so that I can use the dinner table for some gaming (and dining, og course); it has been occupied by spread newspapers and boxes for far too long.

3D Printed: Medium Sized Cargo Container

Not my first attempt at this print, but probably the nicest one.

The STL can be found here on Thingiverse.

I am trying to organize the stuff I have painted for Legion into some boxes in a larger cardboard crate, and I shall be taking some more photos of stuff I have not shown, yet, over the next couple of days (there is actually quite a back-log, regarding blog posts).

3D Printed: More Star Wars Crates

I have had some problems with a recently purchased roll of blue PLA filament, and I am now churning out small bits and bobs to tune a profile for handling it.

At the front you can see one of the weird results - I am keeping that one, because I think I can paint it as if burning, but I have had to chuck quite a few pieces. They are turning out OK, now, and I have started a medium sized cargo container which should finish about 7:30 tomorrow morning.

3D Printed: Star Wars Scatter Terrain

Smaller pieces to populate the Star Wars Legion table printed so far (the Imperial bunker and the power-thingies not included). Everything off Thingiverse.

Currently printing a 30cm redwood (jungle/Endor), and when it finishes this evening, I shall have to change filament to a lighter grey for printing some additional commission pieces for Imperial Assault.

Later this week I shall try my largest print so far, an escape pod, scaled up from a Thingiverse X-wing scale model (I ordered C-3PO, and R2-D2, yesterday, and am going to make a large dune with an indent for the escape pod, so I can stage an Ep. IV Tatooine display).

Legion Terain: A Small Cluster

A 'family photo' of the recently printed terrain pieces.

The printer has been busy doing dungeon tiles the last couple of days, and a Baby Groot pencil holder today, and I have not had time to clean up the extra five Rhydonium cannisters, yet, because I have been working on my jungle terrain, but expect more home-made plastic stuff, soonish...

The girls and I are going to Horsens European Medieval Festival this coming weekend, so there will be no games to report this week, but as soon as I have cleared the jungle bases away, I shall get back to painting Lea's party for Sellswwords & Spellslingers, and hopefully get a game in with her soon!

My Printer is Working!!

The problem turned out to be the tiny screw on top of the extruder arm that was too tight.

Now I am printing an extra barricade for Star Wars Legion (just because), found here on Thingiverse.

I am as thrilled today, as I was frustrated yesterday!

What a Mess...

For those of you who wonder, what all the fuss clearing the prepping station is about...