3D Printed: Pulp Alley Solo Deck Holder

Yesterday, I printed a deck holder for my recently acquired Solo Deck (plus boosters). I also got Tomb of the Serpent with that order from Sally 4th, and I really should be ploughing through it, instead of posting this... 😏

Complete set of Unit Card Holders for Legion

Finished printing card holders for Star Wars Legion yesterday (for now), and now have one for each unit in the starter box.

Card Shoe/Holder for Sellswords & Spellslingers

Printed this yesterday afternoon, my own design. Of course, only the blue Event Cards are going to be in the shoe during play, but all the cards from the basic rules actually fit inside, which is nice enough. I think I am going to design a box with lid for the cards at a later point.

Bear Trap for Sellswords & Spellslingers

I found this neat little design by RobagoN on Thingiverse, and it immediately struck me that it can be used to mark characters caught in traps in Sellswords & Spellslingers!

I printed the first one with a 'skirt', but then tried another one without it, and it stuck just fine to the bed, so I'll keep the skirt off for this kind of small prints (too much cleaning up to do, otherwise).

Printed with resolution 0.2, but it takes so little time to print that you can easily print it with finer layers for a smoother finish.

There is a little cleaning up to do, but otherwise I am very pleased with the result. I think I am going to print some in various grey shades, too, to help mark traps of different kinds.

Star Wars Legion: Empire Card Holders Ready for For First Test Game

While not necessary to play (especially when not using upgrades), I decided to print a card holder for all three units I am going to use in my first game: Darth Vader, and two squads of Stormtroopers.

I expect to get a gaming appointment with Ulolkish next week, and maybe I shall also have some stands for the Rebels ready by then (I have ordered some beige and khaki filament, but I do not think it is going to arrive until Monday).

It is still too darn hot to paint, so I focus on getting stuff printed, and playing games with my daughters at the moment...

3D Card Holder for Star Wars Legion

Yesterday, I also printed my first card holder for Star Wars Legion - by Iggymagoo on Thingiverse.

I had to print it at 2500%, as the model is tiny when opened in Cura - but as you can see, at 2500% cards with or without sleeves fit nicely.

I need to print at least two more in black (for the Imperial forces), and then three in khaki/beige (for the Rebel Alliance) - for now, but I shall have to make one for each unit I wont to field, and that will probably mean at least 10 for each faction.

Good thing that the printer works nicely and does not need constant monitoring! 😉

Card Holder for X-wing and Armada

Over a year ago, I designed this card shoe/holder for damage cards that fits FFG's 'Yellow' card sleeves exactly.

I was getting frustrated by the cards tilting and spreading, and thus made a card holder out of cardboard, but I did not like it that much, although it did get the job done, so I started dabbling in 3D-design - and now, as I have got my new Creality GR10S S3 up and running, it was time to try printing it, and you can see the result to the left (I have nor removed the 'skirt', yes, seen along the back edges).

I printed it lying on its back to avoid supports, but I am going to to make another one standing upright with supports for the 'shelf', so that I may compare the two methods.